Construct your own Christmas tree (version one)

1) Inspired by a tree she saw in London, presumably made with pampas plumes, Camilla fancied trying an alternative to the traditional pine branch or the tacky tinsel alternative. As pampas is now banned in this country, we used toetoe plumes. Gathering the toetoe was the most difficult part of construction, especially with all the recent rain.

2) We were fortunate to be given a permanent metal base in the shape of a pyramid but you could construct your own from bamboo or a similar material. It needs to be fairly stable to work with easily. You need five or six vertical struts in order to be able to achieve a circular effect. Do not make it too wide if it needs to fit through a conventional door to get it inside when finished.

3) We wove additional horizontal supports into the frame at 20cm intervals using flexible lengths of old grape vine prunings.

4) Starting from the base, tie groups of about three toetoe plumes at a time, forming the bottom layer of the skirt. It needs to be sufficiently dense not to see through. We tied firmly with neutal coloured wool, securing the plumes to the frame and the rings of grapevine.

5) Layer additional skirts on top. Trim the surplus stems of each layer. It took us four layers to reach the top.

Kevin, Sharon and our Christmas tree

Kevin, Sharon and our Christmas tree

6) When it came to decorations, we decided less was more and just adorned our tree with a Trade Aid angel, the historic Jury family Christmas lights which need rewiring each year to work and the red and silver Spotlight reindeer (known here as Kevin and Sharon) at the base.

I recall the “Christmas is over in London” photo blog our daughter Camilla wrote as she wandered the streets of Maida Vale recording the slightly sad sight of Christmas trees put out for green waste collection. I found “Christmas is over in Tikorangi”. Mark said he would dispose of the carbon content of the toetoe Christmas tree. It looked disturbingly like a dead sheep when I came across it.

The second model DIY Christmas tree using the same frame but covered in grape vines is less inclined to moult and lacks the Pacifica charm of the toetoe, but is a more durable option.

1 thought on “Construct your own Christmas tree (version one)

  1. Pingback: Tikorangi: Christmas Tree « Michael Jeans

Comments are closed.